A thorough attic mold inspection is the starting point for any suspected mold-related issue. Without mold testing, there’s no way to accurately determine how bad your mold problem is – or if one exists at all. Your attic mold inspection will allow us to determine if you have mold, how bad it is, how to properly get rid of it and how to prevent it from returning. If you suspect you have mold in your home attic or are concerned about black mold or toxic mold, call Lamunyon Restoration today.
We offer indoor air quality laboratory testing and will come take air samples to determine if your indoor mold spore levels are higher than they should be. Air testing will provide the necessary answers to your mold-related questions.
A thorough visual inspection is the starting point for every residential or commercial mold assessment. Your mold specialist will be looking for conditions that promote mold growth.
Documenting our findings through digital imaging is the easiest way for your mold specialist to relay their findings. We’ll take pictures of all the areas of concern so you see exactly what we saw during your attic mold evaluation.
Thermal imaging cameras (or infrared cameras) allow us to detect temperature differences in, and sometimes behind building materials. Why is this important? Because damp or wet building materials are almost always cooler than dry materials – and it’s the temperature difference that the infrared camera detects. This is an invaluable tool in the detection of moisture sources that cause mold growth.
Since mold needs moisture to develop and thrive, finding that source of moisture is very important. Moisture mapping basically allows us to locate building materials that are damp or wet enough to support mold growth. Testing for moisture also helps us determine if water leaks have been resolved or if they are actively leaking and can locate where water damage starts and stops.
Shortly after your attic mold evaluation, your specialist will compile all of their findings and generate an easy to understand mold evaluation synopsis and scope of work.
In conjunction with your mold evaluation synopsis, your mold specialist will design a mold remediation plan specific to your property. Your scope of work will include cleanup protocol as well as preventative solutions that are necessary to keep mold from returning.
Also referred to as clearance testing. This a specific type of mold testing performed after the remediation is complete. Since we’re removing a bio hazard, it’s important to know that the job was done right – the first time. Clearance testing shows that cleanup efforts were successful.
Lamunyon Restoration is certified to perform attic mold inspections and mold testing. If you need a mold inspection or mold removal then we will be able to help with an effective and safe approach.
Your mold specialist may suggest taking air samples to determine if your indoor mold spore levels are higher than they should be. Is it just water staining, or is it mold? Surface testing with mold swabs or bio tape lifts will answer those questions. In many cases, surface testing isn’t necessary if mold growth is visibly obvious.
Air, swab and tap lift testing are additional testing services we offer at an additional cost and only done upon request. Testing samples will be sent to a laboratory for analysis and a full report will be provided to you within a few business days. This report shows Elevated (Unacceptable) and Acceptable levels of all findings, as well as spore identification.
When mold is suspected behind a wall or above a ceiling, those areas should be tested. Today’s mold testing technologies and techniques allow mold specialists to take air and surface samples from wall or ceiling voids easily with very minimal intrusion. This testing will only be done upon request and accessibility is dependent upon material covering.